---
title: "Arctic Freezer 36 vs Peerless Assassin 120 SE (2026)"
description: "The Peerless Assassin 120 SE cools better as a dual tower for $5 to $10 more. The Arctic Freezer 36 is a slimmer single tower that fits tall RAM more easily."
---

Canonical: https://www.enthusiastreview.com/compare/arctic-freezer-36-vs-thermalright-peerless-assassin-120-se/
Last updated: 2026-11-20
Site: Enthusiast Review

CPU Coolers · Head to head

# Arctic Freezer 36 vs Thermalright Peerless Assassin 120 SE

By [Justin Lee](https://www.enthusiastreview.com/authors/justin-lee/) · Updated November 20, 2026 · Specs from the manufacturers; we have not bench-tested either. [Disclosure](https://www.enthusiastreview.com/disclosure/)

[Arctic Freezer 36](https://www.enthusiastreview.com/gear/arctic-freezer-36/)

85/100 $30–$40

[Check Price](https://www.amazon.com/dp/B09VG6NBSJ?tag=sktiger-20&linkCode=ll1)

[Thermalright Peerless Assassin 120 SE](https://www.enthusiastreview.com/gear/thermalright-peerless-assassin-120-se/)

92/100 $35–$45

[Check Price](https://www.amazon.com/dp/B09LGY38L4?tag=sktiger-20&linkCode=ll1)

## Freezer 36 vs Peerless Assassin SE: The Short Answer

Pick the [Arctic Freezer 36](https://www.enthusiastreview.com/gear/arctic-freezer-36/) if you want a compact single tower that clears tall RAM and is simple to install, at $30 to $40, for a 65 W to 120 W CPU. Pick the Peerless Assassin 120 SE if you want more cooling headroom for hot chips or long loads: its dual-tower design and six [heat pipes](https://www.enthusiastreview.com/glossary/heat-pipes/) beat the Freezer 36's four pipes under sustained heat.

## Price: the Freezer 36 costs about $10 less (13% cheaper)

Freezer 36: $30–$40. Peerless Assassin SE: $35–$45. Street prices move often, so check the live listing.

## Height: the Peerless Assassin SE is 4 mm shorter, so it fits more cases

Freezer 36: 159 mm. Peerless Assassin SE: 155 mm.

## Heat pipes: the Peerless Assassin SE has 2 more heat pipes

Freezer 36: 4. Peerless Assassin SE: 6x 6 mm.

## ER Score: the Peerless Assassin SE scores higher, 92 to 85

The ER Score weighs the spec sheet against the price band and owner reports. A higher score does not make it the right pick for every build; the short answer above says which build suits each.

## Specs Side by Side

| Spec | [Freezer 36](https://www.enthusiastreview.com/gear/arctic-freezer-36/) | [Peerless Assassin SE](https://www.enthusiastreview.com/gear/thermalright-peerless-assassin-120-se/) |
| --- | --- | --- |
| Type | Single-tower air, push-pull | Dual-tower air |
| Fans | 2x P12 Pressure-optimised 120 mm PWM | 2x 120 mm PWM |
| Heat pipes | 4 | 6x 6 mm |
| Height | 159 mm | 155 mm |
| Socket support | AM4, AM5, LGA 1700, LGA 1851 | AM4, AM5, LGA 1700, LGA 1851 |
| Versions | Standard, A-RGB, CO (dual ball bearing fans) | — |
| Lighting | — | None on the standard model; ARGB and white versions sold |
| Street price | $30–$40 | $35–$45 |
| ER Score | 85/100 | 92/100 |

## Where They Differ

### How much better does the dual tower cool?

On a 65 W Ryzen 5 or a gaming-focused Ryzen 7, both keep temperatures well under control. Under sustained all-core loads on hotter chips, independent reviews generally show the Peerless Assassin 120 SE a few degrees cooler or quieter at the same temperature. It has two fin stacks and six heat pipes against the Freezer 36's single stack and four pipes. The more power your CPU draws, the more that matters.

### Which is easier with RAM and the motherboard?

The Arctic Freezer 36. As a single tower, its body sits away from the memory slots, so tall RGB modules fit without adjusting a fan. The Peerless Assassin's front tower overhangs the first RAM slot on many boards. The Freezer 36 also leaves more room around the top PCIe slot and the [VRM](https://www.enthusiastreview.com/glossary/vrm/) heatsinks on crowded boards. For small builds, that slimmer footprint is a real advantage.

### How do the fan setups compare?

The Freezer 36 uses two P12 Pressure-optimised 120 mm fans in push-pull on one tower, and the Peerless Assassin uses two 120 mm fans across two towers. Both setups are sensible. Arctic's fans are known for being quiet at moderate speeds. The Thermalright fans are fine but a little more noticeable at full speed. At typical gaming loads neither is loud.

### What about height and installation?

The Freezer 36 is about 159 mm tall and the Peerless Assassin about 155 mm, so both need a standard mid-tower. Arctic's mounting system is simple and owners report it is quick to install, with the fans clipping on after the tower is in place. The Peerless Assassin's mount is also straightforward but needs the middle fan removed during install.

## How They Score

| ER Score part | Freezer 36 | Peerless Assassin SE |
| --- | --- | --- |
| Cooling | 82 | 90 |
| Noise | 86 | 84 |
| Compatibility | 84 | 86 |
| Value | 90 | 98 |
| Overall | **85** | **92** |

## Buy the Freezer 36 If…

- You use tall RGB RAM or a crowded motherboard

- You want simple installation and a slim footprint

- You run a 65 W to 120 W CPU and want to spend the least

[Check the Freezer 36 on Amazon](https://www.amazon.com/dp/B09VG6NBSJ?tag=sktiger-20&linkCode=ll1)

## Buy the Peerless Assassin SE If…

- You want more headroom for hot CPUs or long all-core loads

- You run a Ryzen 7 9800X3D or Core Ultra 7 265K and want lower temperatures

- You do not mind a front fan over the first RAM slot

[Check the Peerless Assassin SE on Amazon](https://www.amazon.com/dp/B09LGY38L4?tag=sktiger-20&linkCode=ll1)

## Freezer 36 vs Peerless Assassin SE FAQ

### Is the Arctic Freezer 36 enough for a Ryzen 7 9800X3D?

For gaming, yes. Under long all-core loads, the 9800X3D runs warmer on a single tower, so a dual tower like the Peerless Assassin gives more headroom.

### Does the Freezer 36 support LGA 1851?

Yes. Arctic lists AM4, AM5, LGA 1700 and LGA 1851 support for the Freezer 36.

### Which is better, the Freezer 36 or the Peerless Assassin SE?

The [Peerless Assassin SE](https://www.enthusiastreview.com/gear/thermalright-peerless-assassin-120-se/) scores higher on our ER Score (92/100 vs 85/100), but the right pick depends on the build. Pick the Arctic Freezer 36 if you want a compact single tower that clears tall RAM and is simple to install, at $30 to $40, for a 65 W to 120 W CPU. Pick the Peerless Assassin 120 SE if you want more cooling headroom for hot chips or long loads: its dual-tower design and six heat pipes beat the Freezer 36's four pipes under sustained heat.

### Which is cheaper, the Freezer 36 or the Peerless Assassin SE?

The Freezer 36 usually costs less: $30–$40 against $35–$45 for the Peerless Assassin SE. Prices move often, so check the live listing before you buy.

### Who should skip the Freezer 36?

Skip the Freezer 36 if your case clears less than 159 mm or a dual tower costs the same where you shop.

### Who should skip the Peerless Assassin SE?

Skip the Peerless Assassin SE if your case clears less than 155 mm or you want the quietest fans at full load.

## Related

- [Arctic Freezer 36: full specs and score](https://www.enthusiastreview.com/gear/arctic-freezer-36/)

- [Thermalright Peerless Assassin 120 SE: full specs and score](https://www.enthusiastreview.com/gear/thermalright-peerless-assassin-120-se/)

- [Best CPU Cooler](https://www.enthusiastreview.com/best-cpu-cooler/)

- [Best CPU Cooler for Ryzen 7 9800X3D](https://www.enthusiastreview.com/best-cpu-cooler-for-ryzen-7-9800x3d/)

- [Best CPU Cooler for Ryzen 9 3900X and 3950X](https://www.enthusiastreview.com/best-cpu-cooler-for-ryzen-9-3900x-and-3950x/)

- [Best Thermalright Cooler](https://www.enthusiastreview.com/thermalright-review/)

- [Peerless Assassin SE vs Phantom Spirit 120 SE](https://www.enthusiastreview.com/compare/thermalright-peerless-assassin-120-se-vs-thermalright-phantom-spirit-120-se/)

- [Peerless Assassin SE vs NH-D15 G2](https://www.enthusiastreview.com/compare/thermalright-peerless-assassin-120-se-vs-noctua-nh-d15-g2/)

[Freezer 36](https://www.amazon.com/dp/B09VG6NBSJ?tag=sktiger-20&linkCode=ll1)

[Peerless Assassin SE](https://www.amazon.com/dp/B09LGY38L4?tag=sktiger-20&linkCode=ll1)

×
