---
title: "Ripjaws V 3600 CL16 Review: Specs, Score & Verdict (86/100)"
description: "Ripjaws V 3600 CL16 at a glance: capacity 32 GB, speed DDR4-3600, CAS latency CL16. The G.Skill Ripjaws V DDR4-3600 CL16 is the best value AM4 RAM: 32 GB at…"
---

Canonical: https://www.enthusiastreview.com/gear/gskill-ripjaws-v-ddr4-3600-cl16/
Last updated: 2026-11-19
Site: Enthusiast Review

[G.Skill](https://www.enthusiastreview.com/brands/gskill/) · [Memory](https://www.enthusiastreview.com/gear/#memory)

# G.Skill Ripjaws V 32GB (2x16GB) DDR4-3600 CL16

**86**/100 By [Justin Lee](https://www.enthusiastreview.com/authors/justin-lee/) · #4 of 9 RAM kits · $70–$110 · Updated November 19, 2026

## Quick answer

A 32 GB (2x16GB) DDR4-3600 [CL16](https://www.enthusiastreview.com/glossary/cas-latency/) kit rated 16-19-19-39 at 1.35 V with an [XMP 2.0](https://www.enthusiastreview.com/glossary/intel-xmp/) profile and a 42 mm heatspreader. It sells for about $70 to $110, though DDR4 has also climbed as makers wind down production.

- **Best for:** Ryzen 3000 and 5000 owners who want the sweet-spot DDR4 speed without paying for RGB

- **Skip it if:** you are building a new AM5 or Intel Core Ultra system, which need DDR5

- **Capacity:** 32 GB (2x 16 GB)

- **Speed:** DDR4-3600

- **CAS latency:** CL16

- **Voltage:** 1.35 V

[Check Price on Amazon](https://www.amazon.com/s?k=G.Skill%20Ripjaws%20V%2032GB%202x16GB%20DDR4-3600%20CL16&tag=sktiger-20)

All Ripjaws V 3600 CL16 specs ↓

## G.Skill Ripjaws V 32GB (2x16GB) DDR4-3600 CL16 Specs

| Capacity | 32 GB (2x 16 GB) |
| --- | --- |
| Speed | DDR4-3600 |
| CAS latency | CL16 |
| Voltage | 1.35 V |
| Profile | Intel XMP 2.0 |
| Height | 42 mm |
| Type | DDR4 UDIMM |
| Timings | 16-19-19-39 |
| Lighting | None |
| Street price | $70–$110 (typical band; check the live price) |

Specs from G.Skill's published spec sheet and product listings. The Ripjaws V 3600 CL16 has not been bench-tested by us: its score comes from the spec sheet, platform requirements, widely published independent measurements and owner reports. [How we score](https://www.enthusiastreview.com/how-we-review/).

## ER Score: 86/100

The ER Score weighs the spec sheet against the price band and what owners report over time.

Speed86
Compatibility88
Value88
Build80

## Our Verdict

For an AM4 system, DDR4-3600 CL16 is the speed to aim for, and the Ripjaws V is the plainest, cheapest way to get it from a major brand. At 3600, Ryzen 3000 and 5000 chips can run the [Infinity Fabric](https://www.enthusiastreview.com/glossary/infinity-fabric/) at 1,800 MHz in a 1:1 ratio with the memory clock, which keeps latency low. G.Skill rates this kit at 16-19-19-39 and 1.35 V.

It suits two kinds of buyer. One is a Ryzen 7 3700X or Ryzen 9 3900X owner who is still running 16 GB of DDR4-3000 and wants a cheap boost before a [Ryzen 7 5700X3D](https://www.enthusiastreview.com/gear/ryzen-7-5700x3d/) drop-in. The other is someone filling a B550 or X570 board for a budget gaming build. In both cases, 32 GB is the right amount in 2026.

The trade-offs are small. The 42 mm heatspreader is taller than the 34 mm Vengeance LPX, so check clearance under big dual-tower coolers. There is no RGB, which is the point. And DDR4 prices have climbed as memory makers shift production to DDR5, so check the live price before buying and avoid paying a premium for lit kits. Its closest rival is the [Trident Z Neo DDR4-3600 CL16](https://www.enthusiastreview.com/gear/gskill-trident-z-neo-ddr4-3600-cl16/), the same speed and timings with RGB for about $20 more. The budget alternative is the [Vengeance LPX DDR4-3200](https://www.enthusiastreview.com/gear/corsair-vengeance-lpx-ddr4-3200-cl16/).

### Pros

- DDR4-3600 CL16, the AM4 sweet spot

- 1:1 Infinity Fabric at 1,800 MHz on most Ryzen 3000 and 5000 chips

- No RGB premium

- Big-brand kit at a fair price

### Cons

- 42 mm heatspreader taller than low-profile kits

- DDR4 prices rising as production winds down

- XMP-only, profile tuned for Intel naming

## Ripjaws V 3600 CL16 Setting Up EXPO or XMP

DDR4 kits use Intel XMP profiles, and AMD boards read them under their own names: D.O.C.P. on ASUS, A-XMP on MSI and XMP on Gigabyte and ASRock. Enable it in the BIOS to set DDR4-3600 CL16 at 1.35 V. Without it, the kit runs at a default of DDR4-2133 or 2400.

On Ryzen 3000 and 5000, check that the Infinity Fabric clock (FCLK) is 1,800 MHz, matching the 1,800 MHz memory clock for a 1:1 ratio. Most boards set this automatically with XMP, but some leave FCLK on a lower auto value. A few Ryzen 3000 chips cannot run FCLK 1800 stably; if so, drop to DDR4-3466 or 3400 with FCLK to match rather than running out of sync.

- **Enable XMP or D.O.C.P.:** Select Profile 1 in the BIOS memory or overclocking menu.

- **Set FCLK to 1800:** If it is not already, set the Infinity Fabric frequency to 1800 MHz.

- **Save and test:** Boot to Windows and run a memory test such as MemTest86 or TestMem5 for stability.

## Alternatives to the G.Skill Ripjaws V 32GB (2x16GB) DDR4-3600 CL16

### Cheaper options

[Corsair Vengeance LPX 32GB (2x16GB) DDR4-3200 CL1680/100 · $60–$100](https://www.enthusiastreview.com/gear/corsair-vengeance-lpx-ddr4-3200-cl16/)

[Crucial Pro 32GB (2x16GB) DDR4-3200 CL2274/100 · $55–$90](https://www.enthusiastreview.com/gear/crucial-pro-ddr4-3200/)

### More from G.Skill

[G.Skill Flare X5 32GB (2x16GB) DDR5-6000 CL3090/100 · $110–$200](https://www.enthusiastreview.com/gear/gskill-flare-x5-ddr5-6000-cl30/)

[G.Skill Trident Z5 Neo RGB 64GB (2x32GB) DDR5-6000 CL3085/100 · $220–$400](https://www.enthusiastreview.com/gear/gskill-trident-z5-neo-rgb-ddr5-6000-64gb/)

[G.Skill Trident Z Neo 32GB (2x16GB) DDR4-3600 CL1684/100 · $90–$130](https://www.enthusiastreview.com/gear/gskill-trident-z-neo-ddr4-3600-cl16/)

## G.Skill Ripjaws V 32GB (2x16GB) DDR4-3600 CL16 FAQ

### Is DDR4-3600 CL16 still the best RAM for Ryzen 5000?

Yes. It lets most Ryzen 3000 and 5000 chips run the Infinity Fabric at 1,800 MHz in a 1:1 ratio, the best balance of latency and bandwidth.

### Does the Ripjaws V work on AMD boards?

Yes. AMD boards read its XMP 2.0 profile as D.O.C.P. on ASUS, A-XMP on MSI, and XMP on Gigabyte and ASRock.

### Why are DDR4 prices going up?

Memory makers are shifting production to DDR5 and newer memory types, so DDR4 supply has tightened. Check the live price before buying.

### Is the G.Skill Ripjaws V 32GB (2x16GB) DDR4-3600 CL16 worth it?

A 32 GB (2x16GB) DDR4-3600 CL16 kit rated 16-19-19-39 at 1.35 V with an XMP 2.0 profile and a 42 mm heatspreader. It sells for about $70 to $110, though DDR4 has also climbed as makers wind down production. It scores 86/100 on our ER Score, ranking #4 of the 9 RAM kits we track. It is best for ryzen 3000 and 5000 owners who want the sweet-spot DDR4 speed without paying for RGB; skip it if you are building a new AM5 or Intel Core Ultra system, which need DDR5.

## Featured In

- [Best RAM for Gaming](https://www.enthusiastreview.com/best-ram-for-gaming/) Best DDR4 Kit

- [Best RAM for Ryzen 9 3900X and 3950X](https://www.enthusiastreview.com/best-ram-for-ryzen-9-3900x-and-3950x/) Best Without RGB
